2021-10-09 1536
Jiangmen DongxingVibration value of ceiling fan Ordinary equipmentWe usually consider fans and motors to be very common equipment. But we have overlooked that they provide important airflow for indust
2022-04-11 1783
1. The first thing that comes to mind is that the motor lubrication is not good, and the shaft part needs to be lubricated with oil. I had this situation yesterday, where the electric fan blades were
2021-12-03 1479
What are the precautions for maintenance and upkeep of a large ceiling fan?1、 Repair and maintenance of circuits:1. Check whether the mechanical switch action of the regulating valve is reliable and f
2021-11-10 1283
The advantages of large industrial ceiling fansIn the scorching summer, in large industrial plants, the temperature is high and there is poor ventilation, resulting in poor heat dissipation. Working i
2020-12-10 2070
Ceiling fan trust is still a type of electric fan that many households use today. Due to the fact that compared to our floor fans and even our seat fans, ceiling fans not only have a larger area of pr
2020-11-26 2301
When purchasing a ceiling fan, you may find that there are three or five leaves. Which one would be better? Here's a brief analysis for you.The difference between three leaf and five leaf ceiling
2020-11-05 1540
1. Buy an additional fan box from a home or electrical supplier. If you cannot start installing work from above the ceiling, it is recommended to buy an additional box for an "old-fashioned" (not a ne
2020-10-23 1549
A large ceiling fan is a low energy consumption ventilation and cooling device that has been favored by many customers. However, due to the fact that the ceiling fan is suspended at high altitude, mai
2020-09-19 1518
The ceiling fan mainly consists of fan blades, fan heads, suspension equipment, and speed controllers. The blades of ceiling fans are generally stamped with 1.5-2mm aluminum plates, mostly in a three
2020-09-09 1421
The ceiling fan has two bearings, the upper one needs to be filled with oil, but the lower one needs to be opened, and most of the surfaces lack oil. First, inject sewing machine oil into the upper pa