stainless steel ceiling fan manufacturer Let me teach you how to install stainless steel ceiling fans.
Process 1: To power off the circuit, remove the corresponding fuse or trip the corresponding circuit breaker. In addition, you can also operate the main switch to cut off the main power supply at home.
Process 2: Remove the original lighting fixtures from the ceiling. Most lighting fixtures are fixed to the ceiling with bolts or screws, and can be disconnected after removing the cover plate.
Process 3: Lower the lamp and disconnect the wires. Mark each wire with masking tape for future identification.
Process 4: Refer to the manufacturer's explanation on wiring color coding and the recommended process for ceiling fan equipment. In most households, there are two wires in the circuit and three wires in the lighting fixtures. Connect the black wire to the black wire, the white wire to the white wire, and then connect the remaining grounding wire (bare wire or green wire) to the metal junction box or other orientation recommended by the manufacturer. Use wiring nuts for connection and check for firmness after connection.
Process 5: Check the wiring, refer to the manufacturer's instructions, and then carefully push all wires into the junction box (metal or plastic box used for electrical connections).
Process 6: Connect the ceiling fan to the junction box or hook according to the manufacturer's instructions.
Process 7: If an electric light is installed below the fan, please ensure that the two components belong to the same brand and are planned to work together (this can make the equipment process much easier). Remove the bottom cover from the fan unit, then pull out all loose wire ends and connect according to the manufacturer's instructions. Usually refers to the connection between black wire and black wire, white wire and white wire, and grounding wire and grounding wire.
Process 8: Power on the circuit from scratch and test the system.
Article source: Stainless steel ceiling fan manufacturer http://www.gd-dx.cn
04-11
Three leaf ceiling fan manufacturer: reasons why the electric fan does not rotate
1. The first thing that comes to mind is that the motor lubrication is not good, and the shaft part needs to be lubricated with oil. I had this situation yesterday, where the electric fan blades were
12-03
What are the precautions for maintenance and upkeep of a large ceiling fan?
What are the precautions for maintenance and upkeep of a large ceiling fan?1、 Repair and maintenance of circuits:1. Check whether the mechanical switch action of the regulating valve is reliable and f
11-10
The advantages of large industrial ceiling fans
The advantages of large industrial ceiling fansIn the scorching summer, in large industrial plants, the temperature is high and there is poor ventilation, resulting in poor heat dissipation. Working i
12-10
What are the reasons why the ceiling fan doesn't turn?
Ceiling fan trust is still a type of electric fan that many households use today. Due to the fact that compared to our floor fans and even our seat fans, ceiling fans not only have a larger area of pr