In summer, many people install ceiling fans at home to cool off, which saves a lot of electricity compared to air conditioning. Due to the high height of the ceiling fan equipment, cleaning and maintenance are very inconvenient. So what are the maintenance methods for ceiling fans?

1、 Maintenance methods for ceiling fans

1. Before using the ceiling fan, it is necessary to check whether the hanging equipment is firm. When using the ceiling fan, use the steel bar hooks in the prefabricated ceiling panel. If there is no steel bar left in the ceiling, use steel bars with a diameter of about 8mm for lifting. Also, pay attention to the rubber wheels on the ceiling fan for shock absorption, and do not throw them away.

2. When the ceiling fan is used for about a year, it is necessary to check whether the various components of the ceiling fan, such as the suspension rod, screws, wiring base, and blades, are loose, corroded, rusted, cracked, and deformed. If there are loose screws, they should be tightened or replaced in a timely manner. Every two to three

Every year, check the wear level of screws and pins, and replace them immediately if severe wear is found.

3. When cleaning the ceiling fan, a dry or slightly damp cloth can be used for wiping, and excessive force should not be applied to avoid changing the balance of the fan blades and causing the ceiling fan to shake.

4. When using a ceiling fan, you should start with the fast gear, which can maintain the components and save electricity. The most important thing is to extend the service life. However, it is important to note that frequent starting can also cause the motor to overheat and shorten its service life.

5. Before using the ceiling fan, conduct a trial run. After the trial run, you can see if there is any instability or abnormal noise when the ceiling fan rotates. If vibration, noise, and odor are found during the trial operation, it should be stopped immediately and the cause should be identified before continuous use can be carried out.

6. When using a ceiling fan, it is necessary to start it quickly and reduce the number of switches to achieve the best maintenance effect and extend its service life.

2、 How to clean ceiling fans

1. Detachable ceiling fan

First, remove the blades of the ceiling fan. After removing the blades, use a clean cloth dipped in clean water to scrub, dry in the sun, and then install the equipment.

2. A ceiling fan that cannot be disassembled

Cleaning ceiling fans that cannot be disassembled can be a bit cumbersome. Due to the high position of the ceiling fan equipment, auxiliary tools such as a ladder must be used. After reaching the ceiling fan through the ladder, a damp cloth can be used for wiping. If there are some oil stains or dust that are difficult to clean, wax oil can be used for wiping.

Article origin: Jiangmen ceiling fan http://www.gd-dx.cn